Hitachi XP P9500 User Manual page 208

The shaded portion, in the next step, is contained in the /etc/vx/
vxvm.exclude file.
2 Make an entry for the controller of the device you wish to remove from
.
VxVM in the controllers section of the /etc/vx/vxvm.exclude file.
In the /etc/vx/vxvm.exclude file, write the shaded portion of the
execution result of the dlmvxexclude utility shown in step 1. The settings
will take effect when the host is restarted.
Figure 3-25 Example of a description in the /etc/vx/vxvm.exclude
(controllers section) on page 3-144
description in the /etc/vx/vxvm.exclude file.
The shaded portion indicates the specified entry.
3 Execute the following command to restart the host and apply the settings.
.
# reboot
4 Execute the dlnkmgr command's view -path operation to identify the
.
HDLM devices that must be recognized by VxVM.
3-144
Figure 3-25 Example of a description in the /etc/vx/vxvm.exclude
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
shows an example of such a
(controllers section)