Creating A Zfs Boot Disk Environment; Copying The Local Boot Disk Environment To The Lus (Scsi Device) In The Storage System - Hitachi XP P9500 User Manual

1 Copy the local boot disk environment from the ZFS file system to the LUs
.
(SCSI device) in the storage system.
2 Replace the LUs on the SCSI device in the storage system with those on
.
the HDLM device.
You can also use the above procedure to create a boot disk when the pre-
migration boot disk is in the storage system rather than on the local disk, or
when the file system is a UFS file system.

Creating a ZFS Boot Disk Environment

The following describes the procedure for creating a ZFS boot disk
environment.
Copying the local boot disk environment to the LUs (SCSI device) in the storage
system
Copy the local boot disk environment to the LUs (SCSI device) in the storage
system. The following describes the preparations required before you can
start copying.
Preparations before copying:
Figure 3-12 Creating a ZFS boot disk environment
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
3-91