Hitachi XP P9500 User Manual page 461

Message
ID
KAPL05020 Processing of IOCTL(aa...aa) will
-I now start.
KAPL05021 Processing of IOCTL(aa...aa)
-I completed normally.
KAPL05023 Could not process the
-E IOCTL(aa...aa). (bb...bb:cc...cc)
Check the message of the HDLM
command or the HDLM manager,
and then take the appropriate
action. If you do not know the
appropriate action, execute the
DLMgetras utility to collect error
information, and then contact your
vendor or maintenance company.
Refer to the HDLM User's Guide for
instructions how to execute the
DLMgetras utility.
KAPL05039 Received the IOCTL error from Disk
-W Driver. errno = aa...aa
(bb...bb:cc...cc) Check whether the
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
bb...bb: Path ID (hexadecimal
number)
Action
None.
Details
An IOCTL request was received..
aa...aa: IOCTL code
(hexadecimal number)
Action
None.
Details
The processing for the requested
IOCTL operation was successful.
aa...aa (hexadecimal number):
IOCTL code
Action
None.
Details
An attempt to process the
requested IOCTL call has failed.
aa...aa: IOCTL code
(hexadecimal number)
bb...bb: Error code (hexadecimal
number)
cc...cc: 0 (fixed)
Action
Check the message of the HDLM
command (dlnkmgr) or the
HDLM manager, and then take
the appropriate action. If you do
not know the appropriate action,
execute the DLMgetras utility for
collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is
a maintenance contract for
HDLM and report the error and
detail code. For details on the
DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
Details
The HDLM filter driver received
an IOCTL error from a lower sd
or ssd driver.
The
8-37