Hitachi XP P9500 User Manual page 373

Hitachi dynamic link manager software user guide for solaris (6.6) (hit5205-96011, november 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Summary displayed: The user specifies the -lu -c parameter or -lu -c -
item parameter.
Displayed item
No summary
Summary
displayed
displayed
Product
Serial
S/N
number
LUs
iLU
#1
SLPR
SLPR
HDevName
HDevName
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Table 6-17 Displayed LU Information
Model ID of the storage system
Serial number of the storage system
Total number of LUs managed by HDLM among the
LUs in the storage system
LU number of the storage system.
This number combined with the storage system
name (shown in DskName) identifies the LU that is
accessed by a path.
For the Lightning 9900 Series, Lightning 9900V
Series, Hitachi NSC55, Hitachi Universal
Storage Platform 100, Hitachi Universal Storage
Platform 600, or Hitachi Universal Storage
Platform 1100, indicated by a hexadecimal
number. The first two characters of iLU are the
CU number, and the last two characters are the
internal LU number within the CU.
For HP XP10000/HP XP12000, P9500, or SVS,
indicated by a hexadecimal number. The first
three characters of iLU are the CU number, and
the last two characters are the internal LU
number within the CU. The first character of the
CU number is the value 0.
For the Thunder 9500V Series, or Hitachi
AMS2000/AMS/WMS/SMS series, indicated by a
decimal number. The entire value of iLU is the
internal LU number within the storage system.
You can identify an actual LU by referencing
iLU from the storage system management
program.
For Universal Storage Platform V/VM, or Hitachi
Virtual Storage Platform indicated by a
hexadecimal number. The first two characters
of iLU are the number of the logical DKC (Disk
Controller), the middle two numbers are the CU
number, and the last two characters are the
internal LU number within the CU.
The number of the SLPR to which an LU belongs,
#2
indicated by a number from 0 to 31. A hyphen (-) is
displayed if the storage logical partition function for
the storage system for the target LU is not
supported.
Host device name.
Command Reference
Description
6-55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents