Starting And Stopping The Hdlm Manager; Starting The Hdlm Manager; Stopping The Hdlm Manager - Hitachi XP P9500 User Manual

# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -pdrv

Starting and Stopping the HDLM Manager

If an error occurs in the system, such as in an HDLM program, you may need
to manually stop or start the HDLM manager to recover from the error.

Starting the HDLM Manager

To start the HDLM manager, log in to Solaris as a user with root permissions
and then execute the following command.
# /etc/init.d/DLMManager start
Lower-case characters can be used for the command name (dlmmanager).
# /etc/init.d/dlmmanager start
The startup script that was set up during HDLM installation runs, and starts
the HDLM manager.
Use the following HDLM command's view operation to confirm that the HDLM
manager is running:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager Ver
Alive
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
#
When the HDLM Manager column shows Alive, the HDLM manager is active.

Stopping the HDLM Manager

To stop the HDLM manager, log in to Solaris as a user with root permissions,
and then execute the following command:
# /etc/init.d/DLMManager stop
Lower-case characters can be used for the command name (dlmmanager).
# /etc/init.d/dlmmanager stop
The stop script that was set up during HDLM installation runs, and stops the
HDLM manager.
Execute the following dlnkmgr command's view operation to confirm that the
HDLM manager has stopped.
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager Ver
Dead
KAPL01001-I The HDLM command completed normally. Operation name =
WakeupTime
x.x.x-xx
WakeupTime
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
yyyy/mm/dd hh:mm:ss
4-15