Figure 3-26 When the HBA Port of the Physical Path Connected to a
Hitachi Storage System Is the Same As the One Connected to a Third-party
To remove devices from VxVM, in the above configuration:
1
Use the dlmvxexclude utility to acquire the mapping between controller
.
numbers and devices.
The devices to be removed from VxVM are output to the paths section in
the execution result of the dlmvxexclude utility. For details about the
dlmvxexclude utility, see
of the VxVM Configuration File on page
The following shows an example of executing the dlmvxexclude utility:
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Storage System
The dlmvxexclude Utility for Assisting Creation
7-26.
3-147