Hitachi XP P9500 User Manual page 531

Message
ID
KAPL10767 The migration ended successfully.
-I Do you want to update the boot-
device parameter in the /usr/sbin/
eeprom command for the post-
migration boot disk device?
(aa...aa) [y/n]
KAPL10768 The post-migration boot disk device
-I configuration was updated.
(aa...aa) (bb...bb)
KAPL10769 The partition size on the post-
-W migration boot disk device (aa...aa:
bb...bb) is less than it was before
migration (cc...cc: dd...dd). Are
you sure you want to continue? [y/
n]:
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Message Text
Messages
Explanation
To manually migrate Sun Cluster
global device file systems or SVM
state databases after the utility
ends, enter y. To end the utility
and have the user manually
perform the migration by
following the procedure in
Configuring a Boot Disk
Environment on page
n. [y/n]
Action
To execute the utility, enter y. To
end the utility and have the user
manually perform the migration,
enter n.
Details
The migration ended successfully.
Do you want to update the boot-
device parameter in the /usr/sbin/
eeprom command for the post-
migration boot disk device?
Action
Enter y or n.
Details
The post-migration boot disk
device configuration was updated.
aa...aa= configuration file name
#
(absolute path)
bb...bb= backup file name of pre-
update configuration file (absolute
path)
#
The following information is
output:
/etc/system rootdev
parameter (only specified)
/etc/vfstab
/etc/dumpadm.conf
DUMPADM_DEVICE=...
Action
None.
Details
The partition size on the post-
migration boot disk device
(aa...aa: bb...bb) is less than it
was before migration (cc...cc:
dd...dd). Are you sure you want
to continue? [y/n]:
3-76, enter
8-107