Hdlm Resident Processes; Changing The Configuration Of The Hdlm Operating Environment - Hitachi XP P9500 User Manual

view, completion time = yyyy/mm/dd hh:mm:ss
#
When the HDLM Manager column shows Dead, the HDLM manager is inactive.

HDLM Resident Processes

Table 4-1 HDLM resident processes on page 4-16
resident processes in HDLM. To monitor these processes, use the names
below.
Process
dlmmgr
hbsa_service
hntr2mon
#
You only need to monitor this process when HDLM is linked to Global Link
Manager.
Changing the Configuration of the HDLM Operating
Environment
This section describes how to reconfigure the environment for running HDLM.
If you perform any one of the following operations, you will also need to
perform the operations that are described in this section:
• Adding a new LU, or deleting or changing an existing LU
• Adding or deleting a path for an existing LU
• Editing the HDLM driver unconfiguration definition file (/opt/
DynamicLinkManager/config/dlmfdrv.unconf) to specify that an LU is
to be managed or is not to be managed by HDLM
• Adding, deleting or replacing hardware (including HBAs, Fibre Channel
switches, and storage systems)
• Changing the HBA mounting slot
• Installing or uninstalling the FCode on an HBA
• Changing the LU default controller for a storage system
• Adding, deleting, or changing a CHA port
• Changing the topology of a storage system
• Changing the Fibre Channel switches settings (including connection ports
and zoning)
• Changing a target ID
4-16
Table 4-1 HDLM resident processes
HDLM manager process
Hitachi Command Suite Common Agent Component
Hitachi Network Objectplaza Trace Library (HNTRLib2) process
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
lists and describes the
Description
#
process