Installing Hdlm In A Powerha 5.5 Or Powerha 6.1 Environment; Upgrading Or Re-Installing Hdlm In A Powerha 5.5 Or Powerha 6.1 Environment (In A Local Boot Disk Environment) - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (640 pages) ,
- User manual (574 pages)
Table of Contents
Advertisement
23
If you performed step 5, restore the volume group you backed up.
.
# restvg -f any-desired-file-name-or-device-name hdisk-name
24
Check the path configuration according to the steps described in
.
the Path Configuration on page
25
Unmount the DVD-ROM.
.
# umount /cdrom
26
Delete any mount directory you may have created in step 11.
.
# rm -r /cdrom
Installing HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment
This subsection explains how to install HDLM when you are running services
in a PowerHA 5.5 or PowerHA 6.1 environment.
Upgrading or Re-installing HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment
(in a Local Boot Disk Environment)
Because HDLM version 5.8.1 or earlier cannot be upgraded to HDLM version
5.9 or later, migration is necessary. For details about migration, see
Migrating HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment on page
3-56.
For details about setting up PowerHA, see the PowerHA documentation.
To upgrade or re-install HDLM in an environment that uses PowerHA
and a local boot disk:
1
Log in to AIX as the root user.
.
If you are using a virtual I/O server, see the virtual I/O server
documentation to log in to AIX.
2
Stop PowerHA on the standby host.
.
3
Upgrade or re-install HDLM on the standby host.
.
To do so, perform steps 2 through 23 in
Boot Disk Environment on page 3-35
Installation or Re-installation of HDLM on page 3-35
4
Start PowerHA on the standby host.
.
5
Stop PowerHA on the active host.
.
Specify takeover as the shutdown mode.
6
Upgrade or re-install HDLM on the active host.
.
To do so, perform steps 2 through 23 in
Boot Disk Environment on page 3-35
Installation or Re-installation of HDLM on page 3-35
7
Start PowerHA on the active host.
.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
3-67.
When Installing HDLM in a Local
of
Performing an Upgrade
When Installing HDLM in a Local
of
Performing an Upgrade
Checking
on the standby host.
on the active host.
3-55
Advertisement
Table of Contents
