Sample Application - Delta Electronics PCI-DMC-A01 Programming Manual

3.22.2

Sample Application

Program Appearance
1) Card initialization
Click on the "Initial" button to open and initialize the card.
For a detailed description of card initialization, please refer to "Open card" and "Card
initialization" in Section 3.1.2.
2) Set Servo Node ID and enable motion status display
Enter Node ID and check "Timer" checkbox to enable motion status display
NodeID item: API function's argument variable "NodeID".
Timer Checkbox: Check to display the motion status. Uncheck to disable display.
Revised March, 2012
Chapter 3 Operating Principles | PCI-DMC-A01 / PCI-DMC-B01
Figure 3.104
Figure 3.105
3-77