Delta Electronics PCI-DMC-A01 Programming Manual page 177

6.7 _DMC_01_check_nodeno
 FORMAT
I16 PASCAL _DMC_01_check_nodeno(U16 CardNo, U16 NodeID,U16 SlotID,U16* exist)
 Purpose
Checks to see if the node already exists.
 Parameters
Name Data Type
CardNo
NodeID
SlotID
exist
 Example
U16 CardNo=0;
U16 NodeID =1;
U16 SlotID =0; //If Slot ID is set to 0, then the Slave is a servo drive
U16 exist =0;
I16 status= _DMC_01_check_nodeno (CardNo, NodeID, SlotID, &exist);
Revised March, 2012
Unit
U16 Number Unit
U16 Number Unit
U16 Number Unit
U16* Selection
Chapter 6 Interface API | PCI-DMC-A01 / PCI-DMC-B01
CardNo is between 0~15
Node ID
Slot ID
0: Node ID does not exist
1: Node ID exists
Description
6-5