Delta Electronics PCI-DMC-A01 Programming Manual page 358

Chapter 25 Remote Module Control API | PCI-DMC-A01 / PCI-DMC-B01
25.3 _DMC_01_set_rm_input_filter_enable
 FORMAT
I16 PASCAL _DMC_01_set_rm_input_filter_enable(U16 CardNo, U16 NodeID,
U16 SlotID,U16 port,U16 enable)
 Purpose
Enables software mask for bit 0 to bit 15 of the remote I/O module's input port.
 Parameters
Name Data Type
CardNo
NodeID
SlotID
port
enable
 Example
U16 CardNo=0;
U16 NodeID=1;
U16 SlotID=0;
U16 Port=0;
U16 Enable=0xFF;
/* Set bit 0 ~ bit 7 of filter mask for Port 0 of Remote digital input module to ON */
I16 status = _DMC_01_set_rm_input_filter_enable(CardNo, NodeID, SlotID, Port, Enable);
25-4
Unit
U16 Number Unit
U16 Number Unit
U16 Number Unit
U16 Selection
U16 Number
Description
CardNo is between 0~15
Node ID
Slot ID
0: Port 0
1: Port 1
2: Port 2
3: Port 3
Port 0/1/2/3 bit0~bit15 software filter (Value
0~0xFFFF)
Revised March, 2012