Delta Electronics PCI-DMC-A01 Programming Manual page 173

Function Name
_DMC_01_initial_bus
_DMC_01_start_ring
_DMC_01_get_device_table
_DMC_01_get_node_table
_DMC_01_check_card_running
_DMC_01_reset_card
_DMC_01_check_nodeno
_DMC_01_get_master_connect_status
_DMC_01_get_mailbox_Error
_DMC_01_get_mailbox_cnt
_DMC_01_get_dsp_cnt
_DMC_01_set_dio_output
_DMC_01_get_dio_output
_DMC_01_get_dio_input
_DMC_01_get_cycle_time
Revised March, 2012
Chapter 6 Interface API | PCI-DMC-A01 / PCI-DMC-B01
Chapter 6 Interface API
Table 6.1
Initialize external bus
Start ring communication
Get device table
Get node table
Check to see if card is running
Reset selected card
Check to see if node already exists
Get the connection status between the Master
Card and expansion module
Get number of MailBox errors
Get MailBox counter value
Get Interrupt counter value
Set GPIO output pin status
Get GPIO output pin status
Get GPIO input pin status
Get current cycle time for finding/checking
devices
Description
6-1