Delta Electronics PCI-DMC-A01 Programming Manual page 363

25.8 _DMC_01_set_rm_output_active
 FORMAT
I16 PASCAL _DMC_01_set_rm_output_active (U16 CardNo, U16 NodeID, U16 SlotID,
U16 Enable)
 Purpose
Enables/disables output from the remote I/O module.
 Parameters
Name Data Type
CardNo
NodeID
SlotID
Enable
 Example
U16 CardNo=0;
U16 NodeID=1;
U16 SlotID=0;
U16 Enable=1;
I16 status = _DMC_01_set_rm_output_active (CardNo, NodeID, SlotID, Enable);
Revised March, 2012
Chapter 25 Remote Module Control API | PCI-DMC-A01 / PCI-DMC-B01
Unit
U16 Number Unit
U16 Number Unit
U16 Number Unit
U16 Selection
Description
CardNo is between 0~15
Node ID
Slot ID
0: Disable output
1: Enable output and send output value to
target
25-9