Table of Contents
Advertisement
Chapter 41 Speed Continue API | PCI-DMC-A01 / PCI-DMC-B01
41.1 _DMC_01_speed_continue
FORMAT
I16 PASCAL _DMC_01_speed_continue (U16 CardNo, U16 NodeID, U16 SlotID, U16 enable)
Purpose
Enables/disables speed continue.
Parameters
Name
Data Type
CardNo
NodeID
SlotID
Enable
Example
U16 CardNo=0, U16 NodeID=1, SlotID=0;
U16 enable=1;
I16 status = _DMC_01_speed_continue (CardNo, NodeID, SlotID, enable);
NOTE
※ When you set _DMC_01_speed_continue parameter enable=1, all further motion
commands must have StrVel parameter set to 0 in order to achieve the Speed
Continue effect.
41-2
Unit
U16
Number Unit
U16
Number Unit
U16
Number Unit
U16
Selection
Description
CardNo is between 0~15
Node ID
Slot ID
0: Disable speed continue
1: Enable speed continue
Revised March, 2012
Advertisement
Table of Contents
