Delta Electronics PCI-DMC-A01 Programming Manual page 354

Chapter 24 Synchronization Motion Control API | PCI-DMC-A01 / PCI-DMC-B01
24.1 _DMC_01_sync_move
 FORMAT
I16 PASCAL _DMC_01_sync_move(I16 CardNo)
 Purpose
Starts motion sync.
 Parameters
Name Data Type
CardNo
 Example
U16 CardNo=0;
I16 status = DMC_01_sync_move (I16 CardNo);
24.2 _DMC_01_sync_move_config
 FORMAT
I16 PASCAL _DMC_01_sync_move_config (I16 CardNo, U16 NodeID,U16 SlotID,I16 enable)
 Purpose
Enables/disables motion sync.
 Parameters
Name Data Type
CardNo
NodeID
SlotID
enable
 Example
U16 CardNo=0, NodeID=1, SlotID=0;
I16 enable=1;
I16 status = _DMC_01_sync_move_config(I16 CardNo, U16 NodeID,U16 SlotID,I16 enable);
24-2
Unit
U16 Number Unit
Unit
U16 Number Unit
U16 Number Unit
U16 Number Unit
I16 Selection
Description
CardNo is between 0~15
Description
CardNo is between 0~15
Node ID
Slot ID
0: Disable sync
1: Enable sync
Revised March, 2012