Delta Electronics PCI-DMC-A01 Programming Manual page 414

Chapter 29 4-Channel Analog Output Remote I/O Module API | PCI-DMC-A01 / PCI-DMC-B01
29.7 _DMC_01_rm_04da_set_output_error_clear
 FORMAT
I16 PASCAL _DMC_01_rm_04da_set_output_error_clear (U16 CardNo, U16 NodeID, U16
SlotID, U16 ChannelNo, U16 On_Off)
 Purpose
Clears error status.
 Parameters
Name Data Type
CardNo
NodeID
SlotID
ChannelNo
On_Off
 Example
U16 CardNo = 0;
U16 NodeID = 1;
U16 SlotID = 0;
U16 ChannelNo = 0;
U16 On_Off = 1; //Clear Error
I16 status = _DMC_01_rm_04da_set_output_error_clear (CardNo, NodeID, SlotID,
ChannelNo, On_Off);
29-8
Unit
U16 Number Unit
U16 Number Unit
U16 Number Unit
U16 Number Unit
U16 Selection
Description
CardNo is between 0~15
Node ID is between 0~12
0
Channel ID is between 0~3
0: Disable CleanError
1: Enable CleanError
Revised March, 2012