Rf Auto-Tuning; Default Radio Profile; Radio-Specific Parameters - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

The RF Auto-Tuning feature dynamically assigns channel and power settings to AP radios, and adjusts
those settings when needed. RF Auto-Tuning can perform the following tasks:
• Assign initial channel and power settings when an AP radio is started.
• Periodically assess the RF environment and change the channel or power setting if
needed.
• Change the transmit data rate or power to maintain at least the minimum data rate with all
associated clients.
By default, RF Auto-Tuning is enabled for channel configuration but disabled for power configuration.
MSS contains one default radio profile, named default. To apply common parameters to radios, you can
modify the default profile or create a new one. When you create a new profile, the radio parameters in
the profile are set to their factory default values.
The channel number, transmit power, and external antenna parameters are unique to each radio and
are not controlled by radio profiles. The table below lists the defaults for these parameters.
Parameter
antenna-location
antennatype
auto-tune max-power
Channel
mode
radio-profile
tx-power
D-Link DWS-1008 User Manual

RF Auto-Tuning

Default Radio Profile

Radio-Specific Parameters

Default Value
indoors
internal.
Highest setting allowed for the
country of operation or highest
setting supported on the hardware,
whichever is lower.
• 802.11b/g - 6
• 802.11a - Lowest valid number for
the country of operation
disable
None. You must add the radios to a
radio profile.
Highest setting allowed for country
of operation or upported on the
hardware, whichever is lower.
Description
Location of the radio's antenna.
Note: This parameter applies only to APs that support
external antennas.
D-Link external antenna model
Note: This parameter is configurable only on APs that
support external antennas.
Maximum percentage of client retransmissions a radio
can experience before RF Auto-Tuning considers
changing the channel on the radio.
Number of the channel in which a radio transmits and
receives traffic channel
Operational state of the radio.
802.11 settings
Transmit power of a radio, in decibels the referred to 1
milliwatt (dBm) highest setting.
11