Displaying The Aaa Configuration - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

The user terminated the session on DWS-0017:
DWS-0017# show accounting statistics
May 21 17:07:32
Acct-Status-Type=STOP
Acct-Authentic=2
Acct-Multi-Session-Id=SESSION-4-1106424789
User-Name=Administrator@example.com
Acct-Session-Time=361
Event-Timestamp=1053536852
Acct-Output-Octets=2560
Acct-Input-Octets=5760
Acct-Output-Packets=20
Acct-Input-Packets=45
Vlan-Name=default
Calling-Station-Id=00-06-25-09-39-5D
Nas-Port-Id=2/1
Called-Station-Id=00-0B-0E-76-56-A0
If you configured accounting records to be sent to a RADIUS server, you can view the records of user
roaming at the RADIUS server. For information about requesting accounting records from the RADIUS
server, see the documentation for your RADIUS server.

Displaying the AAA Configuration

To view the results of the AAA commands you have set and verify their order, type the show aaa
command. The order in which the commands appear in the output determines the order in which MSS
matches them to users.
For example:
DWS-1008# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server Addr
----------------------------------------------------------------------------------------
rs-3 198.162.1.1 1821 1813
rs-4 198.168.1.2 1821 1813
rs-5 198.162.1.3 1821 1813
Server groups
sg1: rs-3 sg2: rs-4
Web Portal: enabled
set authentication admin Jose sg3
set authentication console * none
set authentication mac ssid mycorp * local
set authentication dot1x ssid mycorp Geetha eap-tls
set authentication dot1x ssid mycorp * peap-mschapv2 sg1 sg2 sg3
set accounting dot1x Nin ssid mycorp stop-only sg2
set accounting admin Natasha start-stop local
user Nin
D-Link DWS-1008 User Manual
Ports T/o Tries Dead State
5 3
77 11
42 23
sg3: rs-5
0 UP
2 UP
0 UP
0