Changing The Short Retry Threshold; Changing The Long Retry Threshold; Configuring A Radio Profile - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

The short retry threshold specifies the number of times a radio can send a short unicast frame for
an SSID without receiving an acknowledgment for the frame. A short unicast frame is a frame that is
shorter than the RTS threshold.
To change the short retry threshold, use the following command:
set service-profile name short-retry threshold
The threshold can be a value from 1 through 15. The default is 5.
To change the short retry threshold for service profile sp1 to 3, type the following command:
DWS-1008# set service-profile sp1 short-retry 3
success: change accepted.
The long retry threshold specifies the number of times a radio can send a long unicast frame for an
SSID without receiving an acknowledgment for the frame. A long unicast frame is a frame that is equal
to or longer than the RTS threshold.
To change the long retry threshold, use the following command:
set service-profile name long-retry threshold
The threshold can be a value from 1 through 15. The default is 5.
To change the long retry threshold for service profile sp1 to 8, type the following command:
DWS-1008# set service-profile sp1 long-retry 8
success: change accepted.
A radio profile is a set of parameters that apply to multiple radios. You can easily assign configuration
parameters to many radios by configuring a profile and assigning the profile to the radios.
To configure a radio profile:
• Create a new profile.
• Change radio parameters.
• Map the radio profile to one or more service profiles.
The channel number, transmit power, and external antenna type are unique to each radio and are not
controlled by radio profiles.
D-Link DWS-1008 User Manual

Changing the Short Retry Threshold

Changing the Long Retry Threshold

Configuring a Radio Profile

10