Copying And Modifying The Web Login Page - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

Copying and Modifying the Web Login Page

To copy and modify the D-Link Web login page:
1. Configure an unencrypted SSID on a switch. The SSID is temporary and does not need
to be one you intend to use in your network. To configure the SSID, use the following
commands:
set service-profile name ssid-name ssid-name
set service-profile name ssid-type clear
set service-profile name auth-fallthru web-portal
set radio-profile name service-profile name
set {ap port-list | dap dap-num} radio {1 | 2} radio-profile name mode enable
Use the first two commands to configure a temporary SSID and temporary radio profile. Use the last
command to map the temporary radio profile with the disabled radio, and enable the radio.
Note: If the radio you plan to use is already in service, first you will need to disable the radio profile the
radio is in and remove the radio from the profile.
2. From your PC, attempt to directly access the temporary SSID. The switch should serve the
login page.
3. Use your browser to save a copy of the page.
4. Use a Web page editor or text editor to modify the page title, greeting, logo, and warning
text.
5. Save the modified page.
Note: Filenames and paths for image source files must be relative to the HTML page.
For example, if login page mycorp-login.html and image file mylogo.gif are located in
subdirectory mycorp/, specify the image source as mylogo.gif, not mycorp/mylogo.gif.
D-Link DWS-1008 User Manual 01