Displaying Static Ip Address Information For Distributed Aps - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

The following command displays the status of a Distributed AP access point:
DWS-1008# show dap status 1
Dap: 1, IP-addr: 10.2.30.5 (vlan 'vlan-corp'), AP model: dwl-8220ap,
manufacturer: D-Link, name: DAP01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
===============================================================
State: operational (not encrypted)
CPU info: IBM:PPC speed=266666664
Hz version=405GPr id=0x29c15335347f1919 ram=33554432 s/n=0333703027 hw_rev=A3
Uptime: 18 hours, 36 minutes, 27 seconds
Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)
operational channel: 1 operational power: 14
base mac: 00:0b:0e:00:d2:c0
bssid1: 00:0b:0e:00:d2:c0, ssid: public
bssid2: 00:0b:0e:00:d2:c2, ssid: employee-net
bssid3: 00:0b:0e:00:d2:c4, ssid: mycorp-tkip
Radio 2 type: 802.11a,
state: configure succeed [Enabled] operational channel: 64
operational power: 14 base mac: 00:0b:0e:00:d2:c1
bssid1: 00:0b:0e:00:d2:c1, ssid: public
bssid2: 00:0b:0e:00:d2:c3, ssid: employee-net
bssid3: 00:0b:0e:00:d2:c5, ssid: mycorp-tkip
Displaying Static IP Address Information for
To display information about Distributed APs that have been configured with static IP address information,
use the following command:
show dap boot-configuration dap-num
To display statistics counters for Distributed AP 1, type the following command:
DWS-1008# show dap boot-configuration 1
Flags: 11
Enable ip: yes
Enable mx: yes
IP address: 172.16.0.42
gateway: 172.16.0.20
DNS: 172.16.0.1
D-Link DWS-1008 User Manual
Distributed APs
DAP: 1
Enable vlan: no
Vlan Tag: off
IP netmask: 255.255.255.0
IP: 172.16.0.21
name: mxr2
1