Configuring Last-Resort Access For Wired Authentication Ports - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

DWS-1008# show service-profile last-resort-srvcprof
ssid-name:
Beacon:
DHCP restrict:
Short retry limit:
Auth fallthru:
Enforce SODA checks:
Custom success web-page:
Custom logout web-page:
Static COS:
CAC mode:
User idle timeout:
Keep initial vlan:
Web Portal ACL:
WEP Key 1 value:
WEP Key 3 value:
WEP Unicast Index:
Shared Key Auth:
WPA and RSN enabled:
ciphers: cipher-tkip, cipher-ccmp, cipher-wep40
authentication: 802.1X
TKIP countermeasures time: 60000ms
vlan-name = guest-vlan
...

Configuring Last-Resort Access for Wired Authentication Ports

To configure a wired authentication port to allow last-resort access:
• Set the fallthru authentication type on the port to last-resort.
• Create a user named last-resort-wired in the switch's local database.
The following commands configure wired authentication port 5 for last-resort access and add the special
user:
DWS-1008# set port type wired-auth 5 auth-fall-thru last-resort
success: change accepted.
DWS-1008# set user last-resort-wired attr vlan-name guest-vlan2
success: change accepted.
D-Link DWS-1008 User Manual
guest-wlan
yes
no
5
last-resort
yes
no
none
180
no
<none>
<none>
1
NO
ssid-type: crypto
Proxy ARP: no
No broadcast: no
Long retry limit: 5
Sygate On-Demand (SODA): no
SODA remediation ACL:
Custom failure web-page:
Custom agent-directory:
COS: 0
CAC sessions: 14
Idle client probing: yes
Web Portal Session Timeout: 5
WEP Key 2 value: <none>
WEP Key 4 value: <none>
WEP Multicast Index: 1
08