You can use an AeroScout Engine to locate an asset to which an RFID tag is attached.
Using an AeroScout Engine
1. Load the site map in AeroScout System Manager.
2. Mark the origin point (0,0), if not already done.
3. Calibrate distance, if not already done.
4. Add each AP configured as a listener to the map, and enter its IP address.
5. Enable RSSI location calculation.
6. Enable tag positioning.
7. Enable the map to use the APs.
To check an AP's status, right-click on the AP icon and select Status.
D-Link DWS-1008 User Manual
Locating an RFID Tag
188