Debug Messages - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

In this example, the core file is netsys.core.217.tar. (The command_audit.cur file is not a core file and
is created as part of normal system operation.)
The following command copies the core file onto a TFTP server.
DWS-1008# copy core:netsys.core.217.tar tftp://192.168.0.233/netsys.core.217.tar
...........success: sent 573440 bytes in 1.431 seconds [ 400726 bytes/sec]
success: copy complete.
If the switch's network interfaces to the TFTP server have gone down, copy the core file to the nonvolatile
file area before restarting the switch. The following commands copy netsys.core.217.tar to the nonvolatile
file area and verify the result:
DWS-1008# copy core:netsys.core.217.tar file:netsys.core.217.tar
success: copy complete.
DWS-1008# dir
====================================================================
file:
Filename
core:netsys.core.217.tar
file:configuration
file:sysa_bak
Total: 620 Kbytes used, 207202 Kbytes free
====================================================================
Boot:
Filename
boot0:mx040100.020
*boot1:mx040100.020
Boot0: Total: 9780 Kbytes used, 2460 Kbytes free
Boot1: Total: 9796 Kbytes used, 2464 Kbytes free
====================================================================
temporary files:
Filename
core:command_audit.cur 37 bytes
core:netsys.core.217.tar
Total: 560 Kbytes used, 91147 Kbytes free
In addition to generating a core file, the switch also sends debug messages to the serial console during
a system crash. To capture the messages, attach a PC to the port (if one is not already attached) and
use the terminal emulation application on the PC to capture a log of the messages.
D-Link DWS-1008 User Manual
Size Created
560 KB May 06 2005, 21:48:33
48 KB Jul 12 2005, 15:02:32
12 KB Mar 15 2005, 19:18:44
Size Created
9780 KB Aug 23 2005, 15:54:08
9796 KB Aug 28 2005, 21:09:56
Size Created
Aug 28 2005, 21:11:41
560 KB May 06 2005, 21:48:33

Debug Messages

1