D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual page 354

6. To assign Mobility Profile tulip to all users at EXAMPLE, type the following command for
each EXAMPLE\ user:
DWS-1008# set user EXAMPLE\username attr mobility-profile tulip
Users at EXAMPLE are now restricted to ports 2 through 4 and 6, as specified in the tulip
Mobility Profile configuration.
7. Use the show aaa command to verify your configuration. Type the following command:
DWS-1008# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server Addr Ports T/o
------------------------------------------------------------------------------------
Web Portal:
enabled
set accounting dot1x ssid mycorp EXAMPLE\* stop-only local
set authentication dot1x ssid mycorp EXAMPLE\* pass-through
shorebirds
user tech
Password = 1315021018 (encrypted)
user EXAMPLE/nin
filter-id = acl.101.in
mobility-profile = tulip
user EXAMPLE/tamara
filter-id = acl.101.in
mobility-profile = tulip
...
8. Save the configuration:
DWS-1008 save config
success: configuration saved.
D-Link DWS-1008 User Manual
Tries Dead State