Changing The Fragmentation Threshold; Changing The Maximum Receive Threshold; Changing The Maximum Transmit Threshold - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

The fragmentation threshold specifies the longest a frame can be without being fragmented into
multiple frames by a radio before transmission. To change the fragmentation threshold, use the following
command:
set radio-profile name frag-threshold threshold
The threshold can be a value from 256 through 2346. The default is 2346.
To change the fragmentation threshold for radio profile rp1 to 1500 bytes, type the following
command:
DWS-1008# set radio-profile rp1 frag-threshold 1500
success: change accepted.

Changing the Maximum Receive Threshold

The maximum receive threshold specifies the number of milliseconds a frame received by a radio can
remain in buffer memory. To change the maximum receive lifetime, use the following command:
set radio-profile name max-rx-lifetime time
The time can be from 500 ms (0.5 second) through 250,000 ms (250 seconds). The default is 2000 ms
(2 seconds).
To change the maximum receive threshold for radio profile rp1 to 4000 ms, type the following
command:
DWS-1008# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.

Changing the Maximum Transmit Threshold

The maximum transmission threshold specifies the number of milliseconds a frame scheduled to be
transmitted by a radio can remain in buffer memory. To change the maximum transmit lifetime, use the
following command:
set radio-profile name max-tx-lifetime time
The time can be from 500 ms (0.5 second) through 250,000 ms (250 seconds). The default is 2000 ms
(2 seconds).
To change the maximum transmit threshold for radio profile rp1 to 4000 ms, type the following
command:
DWS-1008# set radio-profile rp1 max-tx-lifetime 4000
success: change accepted.
D-Link DWS-1008 User Manual

Changing the Fragmentation Threshold

1