Web Quick Start; Web Quick Start Parameters; Web Quick Start Requirements - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

You can use the Web Quick Start to configure the switch to provide wireless access to up to ten network
users.
To access the Web Quick Start, attach a PC directly to port 1 or port 2 on the switch and use a web
browser on the PC to access IP address 192.168.100.1. (For more detailed instructions, see "Accessing
the Web Quick Start" on page 20.)
Note: The Web Quick Start application is different from Web View. Web View is a web-based
management application that is available at any time on a switch that already has IP connectivity.
(Web View access also requires the switch's HTTPS server to be enabled.) The Web Quick Start
application is accessible only on unconfigured switches.
The Web Quick Start enables you to configure basic wireless access for a small office. You can use the
Web Quick Start to configure the following parameters:
• System name of the switch
• Country code (the country where wireless access will be provided)
• Administrator username and password
• Management IP address and default router (gateway)
• Time and date (statically configured or provided by an NTP server)
• Management access - You can individually select Telnet, SSH, and Web View. You also can
secure the Console port. Access requires the administrator username and password.
• Power over Ethernet (PoE), for ports directly connected to access points
• SSIDs and authentication types. The Web Quick Start enables you to configure one secure
SSID and one clear SSID. You can configure additional SSIDs using the CLI.
• Usernames and passwords for your wireless users. You can configure up to ten users with the
Web Quick Start. To configure additional users, use the CLI.
To use the Web Quick Start, you need the following:
• AC power source for the switch
• PC with an Ethernet port that you can connect directly to the switch
• Category 5 (Cat 5) or higher Ethernet cable
If the PC is connected to the network, power down the PC or disable its network interface card (NIC),
then unplug the PC from the network.
D-Link DWS-1008 User Manual

Web Quick Start

Web Quick Start Parameters

Web Quick Start Requirements

1