Displaying And Positioning Location Policy Rules; Clearing Location Policy Rules And Disabling The Location Policy - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

Displaying and Positioning Location Policy Rules

The order of location policy rules is significant. MSS checks a location policy rule that is higher in the list
before those lower in the list. Rules are listed in the order in which you create them, unless you move
them.
To position location policy rules within the location policy, use before rule-number and modify rule-number
in the set location policy command, or use the clear location policy rule-number command.
For example, suppose you have configured the following location policy rules:
DWS-1008 show location policy
Id Clauses
----------------------------------------------------------------
1) deny if user eq *.theirfirm.com
2) permit vlan guest_1 if vlan neq *.ourfirm.com
3) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.ourfirm.com
4) permit inacl svcs_2.in outacl svcs_3.out if vlan eq bldg4.*
To move the first rule to the end of the list and display the results, type the following commands:
DWS-1008 clear location policy 1
success: clause 1 is removed.
DWS-1008 set location policy deny if user eq *.theirfirm.com
DWS-1008 show location policy
Id Clauses
----------------------------------------------------------------
1) permit vlan guest_1 if vlan neq *.ourfirm.com
2) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.ourfirm.com
3) permit inacl svcs_2.in outacl svcs_3.out if vlan eq bldg4.*
4) deny if user eq *.theirfirm.com
Clearing Location Policy Rules and Disabling the
To delete a location policy rule, use the following command:
clear location policy rule-number
Type show location policy to display the numbers of configured location policy rules. To disable the
location policy on a DWS-1008 switch, delete all the location policy rules.
D-Link DWS-1008 User Manual
Location Policy