Viewing The Edit Buffer; Viewing Committed Security Acls - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

Use the first two commands to display the ACLs that you have not yet committed to nonvolatile storage.
The first command lists the ACLs by name. The second command shows the ACLs in detail.
Use the show security acl info command to display ACLs that are already committed. ACLs are
not available for mapping until you commit them. (To commit an ACL, use the commit security acl
command. See "Committing a Security ACL".)
ACLs do not take effect until you map them to something (a user, Distributed AP, VLAN, port, or virtual
port). To map an ACL, see "Mapping Security ACLs". To display the mapped ACLs, use the show
security acl command, without the editbuffer or info option.
The edit buffer enables you to view the security ACLs you create before committing them to the
configuration. To view a summary of the ACLs in the edit buffer, type the following command:
DWS-1008# show security acl editbuffer
ACL edit-buffer table
ACL
-------------------------------------------------------------
acl-99
acl-blue
acl-violet
To view a summary of the committed security ACLs in the configuration, type the following command:
DWS-1008# show security acl
ACL table
ACL Type
-------------------------------------------------------------
acl-2 IP
acl-3 IP
acl-4 IP
D-Link DWS-1008 User Manual

Viewing the Edit Buffer

Type Status
IP Not committed
IP Not committed
IP Not committed

Viewing Committed Security ACLs

Class Mapping
Static
Static
Static