Specifying A Soda Agent Logout Page; Specifying An Alternate Soda Agent Directory For A Service Profile - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

8 port 10/100 wireless switch with power over ethernet
Hide thumbs Also See for DWS-1008 - AirPremier MobileLAN Switch:
Table of Contents

Advertisement

Specifying a SODA Agent Logout Page

When a client closes the SODA virtual desktop, the client is automatically disconnected from the network.
You can optionally specify a page that is loaded when the client logs out of the network. To do this, use
the following command:
set service-profile name soda logout-page page
To reset the logout page to the default value, use the following command:
clear service-profile name soda logout-page
The page refers to a file on the switch.
You must also enable the HTTPS server on the switch, so that clients can log out of the network and
access the logout page using HTTPS. To do this, use the following command:
set ip https server enable
The client can request the logout page at any time, to ensure that the client's session has been
terminated. You can add the IP address of the switch to the DNS server as a well-known name, and you
can advertise the URL of the page to users as a logout page.
For example, the following command specifies logout.html, which is a file in the root directory on the
switch, as the page to load when a client closes the SODA virtual desktop:
DWS-1008# set service-profile sp1 soda logout-page logout.html
success: change accepted.
The following command specifies logout.html, in the soda-files directory on the switch, as the page to
load when a client closes the SODA virtual desktop:
DWS-1008# set service-profile sp1 soda logout-page soda-files/logout.html
success: change accepted.

Specifying an Alternate SODA Agent Directory for a Service Profile

By default, the switch expects SODA agent files for a service profile to be located in a directory with
the same name as the SSID configured for the service profile. You can optionally specify a different
directory for the SODA agent files used for a service profile. To do this, use the following command:
set service-profile name soda agent-directory directory
D-Link DWS-1008 User Manual


Advertisement

Table of Contents
loading

Table of Contents