D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual page 295
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008 - AirPremier MobileLAN Switch:
- Cli reference manual (531 pages) ,
- User manual (454 pages) ,
- Installation manual (17 pages)
Table of Contents
Advertisement
MSS provides the following VSAs, which you can assign to users configured in the local database or
on a RADIUS server:
•
Encryption-Type—Specifies the type of encryption required for access by the client.
Clients who attempt to use an unauthorized encryption method are rejected.
•
End-Date—Date and time after which the user is no longer allowed to be on the network.
Mobility-Profile—Controls the switch ports a user can access. For wireless users, an
•
MSS Mobility Profile specifies the DWL-8220AP access points through which the user can
access the network. For wired authentication users, the Mobility Profile specifies the wired
authentication ports through which the user can access the network.
•
SSID—SSID the user is allowed to access after authentication.
Start-Date—Date and time at which the user becomes eligible to access the network.
•
MSS does not authenticate the user unless the attempt to access the network occurs at or
after the specified date and time, but before the end-date (if specified).
Time-of-Day—Day(s) and time(s) during which the user is permitted to log into the
•
network.
URL—URL to which the user is redirected after successful WebAAA.
•
•
VLAN-Name—VLAN to place the user on. You also can assign the following RADIUS
attributes to users configured in the local database.
•
Filter-Id—Security ACL that permits or denies traffic received (input) or sent (output) the
switch.
Service-Type—Type of access the user is requesting, which can be network access,
•
administrative access to the enabled (configuration) mode of the MSS CLI, or administrative
access to the nonenabled mode of the CLI.
•
Session-Timeout—Maximum number of seconds allowed for the user's session.
Regardless of whether you configure the user and attributes on RADIUS servers or the switch's local
database, the VLAN attribute is required. The other attributes are optional.
In addition to configuring authorization attributes for users on RADIUS servers or the switch's local
database, you can also configure attributes within a service profile. These authorization attributes are
applied to users accessing the SSID managed by the service profile (in addition to any attributes
supplied by a RADIUS server or the switch's local database).
D-Link DWS-1008 User Manual
Advertisement
Table of Contents
