Client Web Browser Recommendations; Configuring Web Portal Webaaa; Web Portal Webaaa Configuration Example - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

• Use a well-known browser, such as Internet Explorer (Windows), Firefox (Mozilla-based),
or Safari (Macintosh).
• If the WebAAA certificate on the switch is self-signed, configure the browser to trust the
signature by installing the certificate on the browser, so that the browser does not display
a dialog about the certificate each time the user tries to log on.
To configure Web Portal WebAAA:
1. Configure an SSID or wired authentication port and set the fallthru authentication type to
web-portal. The default for SSIDs and for wired authentication ports is none.
2. Configure individual WebAAA users. Because the VLAN is assigned based on the service
profile (where it is set by the attr vlan-name vlan-id option) or web-portal-wired user
(where it is set to default), MSS ignores the VLAN-Name and Tunnel-Private-Group-ID
attributes. However, MSS does assign other attributes if set.
3. Configure web authentication rules for the WebAAA users.
4. Save the configuration changes.

Web Portal WebAAA Configuration Example

This example configures Web-Portal access to SSID mycorp.
1. Configure the user VLAN on ports 2 and 3, and configure an IP interface on the VLAN:
DWS-1008# set vlan mycorp-vlan port 2-3
success: change accepted.
DWS-1008# set interface mycorp-vlan ip 192.168.12.10 255.255.255.0
success: change accepted.
Note: The VLAN does not need to be configured on the switch where you configure Web Portal but
the VLAN does need to be configured on a switch somewhere in the network. The user's traffic will be
tunneled to the switch where the VLAN is configured.
D-Link DWS-1008 User Manual

Client Web Browser Recommendations

Configuring Web Portal WebAAA