Configuring A Client Black List - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

The client black list specifies clients that are not allowed on the network. MSS drops all packets from
the clients on the black list.
By default, the client black list is empty. In addition to manually configured entries, the list can contain
entries added by MSS. MSS can place a client in the black list due to an association, reassociation or
disassociation flood from the client.
The client black list applies only to the switch on which the list is configured. DWS-1008 switches do not
share client black lists.
To add an entry to the list, use the following command:
set rfdetect black-list mac-addr
The following command adds client MAC address 11:22:33:44:55:66 to the black list:
DWS-1008# set rfdetect black-list 11:22:33:44:55:66
success: MAC 11:22:33:44:55:66 is now blacklisted.
To display the client black list, use the following command:
show rfdetect black-list
The following example shows the client black list on the switch:
DWS-1008# show rfdetect black-list
Total number of entries: 1
Blacklist MAC
-------------------------------------------------------------------------
11:22:33:44:55:66
11:23:34:45:56:67
To remove a MAC address from the client black list, use the following command:
clear rfdetect black-list mac-addr
The following command removes MAC address 11:22:33:44:55:66 from the black list:
DWS-1008# clear rfdetect black-list 11:22:33:44:55:66
success: 11:22:33:44:55:66 is no longer blacklisted.
D-Link DWS-1008 User Manual

Configuring a Client Black List

Type
configured
assoc req flood
Port TTL
- -
3 25
8