Enabling and Logging Into Web View
Web View is a web-based management application available on DWS-1008 switches. You can use
Web View for common configuration and management tasks.
Web View is supported on the following browsers:
• Mozilla Firefox Version 1.0 or later
• Microsoft Internet Explorer Version 6.0 or later
TLS 1.0, SSL 2.0, or SSL 3.0 must be enabled in the browser. To enable TLS 1.0, SSL 2.0, or SSL 3.0
in Microsoft Internet Explorer:
1. Select Tools > Internet Options to display the Internet Options dialog box.
2. Select the Advanced tab.
3. Scroll to the bottom of the list of options and select the TLS 1.0, SSL 2.0, or SSL 3.0
option to enable it.
4. Click OK.
• The switch's HTTPS server must be enabled. (This option is enabled by default.) If
HTTPS is disabled, you can enable it using the following command:
set ip https server enable
• The switch must have an IP interface that can be reached by the PC where the
browser is installed.
Note: If you are configuring a new DWS-1008, you can access Web View without any
preconfiguration. Attach your PC directly to the switch's Ethernet management port. Then
enter http://192.168.100.1 in the web browser's Location or Address field.
D-Link DWS-1008 User Manual
System Requirements
Browser Requirements
Switch Requirements