Displaying Multicast Statistics Only; Clearing Multicast Statistics; Displaying Multicast Queriers; Displaying Multicast Routers - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

To display multicast statistics only without also displaying all the other multicast information, use the
following command:
show igmp statistics [vlan vlan-id]
To clear the multicast statistics counters, use the following command:
clear igmp statistics [vlan vlan-id]
The counters begin incrementing again, starting from 0.
To display information about the multicast querier only without also displaying all the other multicast
information, use the following command:
show igmp querier [vlan vlan-id]
To display querier information for VLAN orange, type the following command:
DWS-1008# show igmp querier vlan orange
Querier for vlan orange
Port Querier-IP
-----------------------------------------------------------------------------
1 193.122.135.178
In this example, the pseudo-querier feature is enabled on VLAN orange.
To display information about the multicast routers only without also displaying all the other multicast
information, use the following command:
show igmp mrouter [vlan vlan-id]
To display the multicast routers in VLAN orange, type the following command:
DWS-1008# show igmp mrouter vlan orange
Multicast routers for vlan orange
Port Mrouter-IPaddr
------------------------------------------------------------------------------------------------
10 192.28.7.5
D-Link DWS-1008 User Manual

Displaying Multicast Statistics Only

Clearing Multicast Statistics

Displaying Multicast Queriers

Querier-MAC
00:0b:cc:d2:e9:b4 23

Displaying Multicast Routers

Mrouter-MAC
00:01:02:03:04:05 dvmrp
TTL
Type TTL
33