Enable Auto Learning; Disable Auto Learning - D-Link DGS-1100-06/ME Cli Reference Manual

#---------------------------------------------------------------------------------------------------
#
#
#
#
#--------------------------------------------------------------------------------------------------
command-start
# Basic
config syslogintimeout 5
config sysgroupinterval 120
enable web 80
config arp_aging time 5
config fdb aging_time 300
enable telnet 23
# Vlan
disable asymmetric_vlan
create vlan default
config vlan vlanid 1 add untagged 1-6
config multicast filter 1 forward
config multicast filter 2 forward
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL

enable auto learning

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable auto learning on the Switch:

disable auto learning

Purpose
Syntax
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-06/ME Gigabit Ethernet Switch Configuration
Firmware: Build 1.00.011
Copyright(C) 2010 D-Link Corporation. All rights reserved.
To enable the MAC address auto learning on the switch.
enable auto learning
The enable auto learing command enables the MAC address auto
learning feature on the Switch.
None.
Only administrator-level users can issue this command.
DGS-1100-06/ME:5# enable auto learning
Command: enable auto learning
Success
DGS-1100-06/ME:5#
To disable the MAC address auto learning of the switch.
disable auto learning
16