Fingerprint Log Message; Configuring A Service Profile; Creating A Service Profile - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

To configure AP security requirements, use the following command:
set dap security {require | optional | none}
The require option enforces encryption of management traffic for all Distributed APs, and requires the
key fingerprints to be confirmed in MSS. The none option disables encryption of management traffic for
all Distributed APs. The default is optional, which allows connection to APs with or without encryption.
The following command configures a switch to require Distributed APs to have encryption keys:
DWS-1008# set dap security require
If AP encryption is optional, and an AP whose fingerprint has not been verified in MSS establishes a
management session with the switch, MSS generates a log message such as the following:
DAP-HS:(secure optional) configure DAP 0335301065 with
fingerprint c6:98:9c:41:32:ab:37:09:7e:93:79:a4:ca:dc:ec:fb
The message lists the serial number and fingerprint of the AP. You can check this information against
your records to verify that the AP is authentic.
A service profile is a set of parameters that control advertisement (beaconing) and encryption for an
SSID, as well as default authorization attributes that apply to users accessing the SSID.
This section describes how to create a service profile and set some basic SSID parameters.
To create a service profile and assign an SSID to it, use the following command:
set service-profile name ssid-name ssid-name
An SSID can be up to 32 alphanumeric characters long.
You can include blank spaces in the name, if you delimit the name with single or double quotation marks.
You must use the same type of quotation mark (either single or double) on both ends of the string.
D-Link DWS-1008 User Manual

Fingerprint Log Message

Configuring a Service Profile

Creating a Service Profile

1