Auto Backup Settings - D-Link DGS-3000 Series Reference Manual

NOTE: When the Switch is booting, no configuration commands will be logged.
NOTE: When the user uses AAA authentication to log in, the username should not be changed if the
user has used the Enable Admin function to replace its privilege.

Auto Backup Settings

This window is used to configure the auto-backup function.
To view this window, click System Configuration > Auto Backup Settings as shown below:
The fields that can be configured are described below:
Parameter
Auto Back State
Auto Backup Log State
Auto Backup Trap State
Auto Backup Encryption
Auto Backup File
Template
Auto Backup Mode
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 2-30 Auto Backup Settings window
Description
Click to enable or disable the auto-backup function.
Click to enable or disable the log state of the auto-backup function.
Click to enable or disable the trap state of the auto-backup function.
Click to enable or disable encrypting the FTP or RCP path when using the auto-
backup function to upload the running configuration via FTP or RCP.
Enter the file template of the auto-backup function.
Select the auto-backup mode.
SaveConfig - Click to upload the running configuration file to the remote server when
it is saved.
32