Removing A Port Group; Displaying Port Group Information; Interoperating With Cisco Systems Etherchannel - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

To remove a port group, use the following command:
clear port-group name name
To display port group information, use the following command:
show port-group [name group-name]
To display the configuration and status of port group server2, type the following command:
DWS-1008# show port-group name server2 Port group: server2 is up
Ports: 3, 5

Interoperating with Cisco Systems EtherChannel

Load-sharing port groups are interoperable with Cisco Systems EtherChannel capabilities. To configure
a Cisco Catalyst switch to interoperate with a D-Link DWS-1008 switch, use the following command on
the Catalyst switch:
set port channel port-list mode on
D-Link DWS-1008 User Manual

Removing a Port Group

Displaying Port Group Information