Logging In To A Remote Device - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

Logging In to a Remote Device

From within an MSS console session or Telnet session, you can use the Telnet client to establish a
Telnet client session from a switch's CLI to another device. To establish a Telnet client session with
another device, use the following command:
telnet {ip-addr | hostname} [port port -num]
To establish a Telnet session from switch to 10.10.10.90, type the following command:
DWS-1008# telnet 10.10.10.90
Session 0 pty tty2.d Trying 10.10.10.90...
Connected to 10.10.10.90
Disconnect character is '^t'
Copyright (c) 2002, 2003 D-Link Systems, Inc.
Username:
When you press Ctrl+t or type exit to end the client session, the management session returns to the
local prompt:.
DWS-1008-remote> Session 0 pty tty2.d
terminated tt name tty2.d
DWS-1008#
Use the following commands to manage Telnet client sessions:
show sessions telnet client
clear sessions telnet client [session-id]
These commands display and clear Telnet sessions from a switch's Telnet client to another device.
To display the Telnet client sessions on a switch, type the following command:
DWS-1008# show sessions telnet client
Session Server Address
---------------------------------------------------------------------------------------
0 192.168.1.81
1 10.10.1.22
To clear Telnet client session 0, type the following command:
DWS-1008# clear sessions telnet client 0
You also can clear a Telnet client session by typing exit from within the client session.
D-Link DWS-1008 User Manual
Server Port Client Port
23 48000
23 48001
88