Command Examples - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

RFDetectDoSTraps - Generated when MSS detects a DoS attack other than an associate
request flood, reassociate request flood, or disassociate request flood.
RFDetectInterferingRogueAPTraps - Generated when an interfering device is detected.
RFDetectInterferingRogueDisappearTraps - Generated when an interfering device is no
longer detected.
RFDetectSpoofedMacAPTraps - Generated when MSS detects a wireless packet with the
source MAC address of a D-Link AP, but without the spoofed AP's signature (fingerprint).
RFDetectSpoofedSsidAPTraps - Generated when MSS detects beacon frames for a valid
SSID, but sent by a rogue AP.
RFDetectUnAuthorizedAPTraps - Generated when MSS detects the MAC address of an AP
that is on the attack list.
RFDetectUnAuthorizedOuiTraps - Generated when a wireless device that is not on the list
of permitted vendors is detected.
RFDetectUnAuthorizedSsidTraps - Generated when an SSID that is not on the permitted
SSID list is detected.
To apply the configuration change to all notification types, specify all.
The drop or send option specifies the action that the SNMP engine takes with regard to notifications.
The following command changes the action in the default notification profile from drop to send for all
notification types:
DWS-1008# set snmp notify profile default send all
success: change accepted.
D-Link DWS-1008 User Manual

Command Examples