Displaying Acl Maps To Ports, Vlans, And Virtual Ports; Clearing A Security Acl Map - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

Displaying ACL Maps to Ports, VLANs, and Virtual Ports

Two commands display the port, VLAN, virtual port, and Distributed AP mapping of a specific security
ACL. For example, to show the ports, VLANs, virtual ports, and Distributed APs mapped to acl-999, type
one of the following commands:
DWS-1008# show security acl map acl-999
ACL acl-999 is mapped to:
Port 9 In
Port 9 Out
DWS-1008# show security acl
ACL table
ACL
------------------------------------------------------------------------------
acl-orange
acl-999
acl-blue
acl-violet
To clear the mapping between a security ACL and one or more ports, VLANs, virtual ports, or Distributed
APS, first display the mapping with show security acl map and then use clear security acl map to remove
it. This command removes the mapping, but not the ACL.
For example, to clear the security ACL acljoe from a port, type the following commands:
DWS-1008# show security acl map acljoe
ACL acljoe is mapped to:
Port 4 In
DWS-1008# clear security acl map acljoe port 4 in
success: change accepted.
After you clear the mapping between port 4 and ACL acljoe, the following is displayed when you enter
show security acl map:
DWS-1008# show security acl map acljoe
ACL acljoe is mapped to:
Clearing a security ACL mapping does not stop the current filtering function if the ACL has other
mappings. If the security ACL is mapped to another port, a VLAN, a virtual port, or a Distributed AP, you
must enter a clear security acl map command to clear each map.
D-Link DWS-1008 User Manual
Type Class
IP Static
IP Static
IP Static
IP Static VLAN

Clearing a Security ACL Map

Mapping
Port 9 In
Port 9 Out
Port 1 In
1 Out