Disabling 802.1X Authentication For Wpa; Displaying Wpa Settings - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

8 port 10/100 wireless switch with power over ethernet
Hide thumbs Also See for DWS-1008 - AirPremier MobileLAN Switch:
Table of Contents

Advertisement

Disabling 802.1X Authentication for WPA

To disable 802.1X authentication for WPA clients, use the following command:
set service-profile name auth-dot1x {enable | disable}
Note: This command does not disable 802.1X authentication for non-WPA clients.
To disable WPA authentication in service profile wpa, type the following command:
DWS-1008# set service-profile wpa auth-dot1x disable
success: change accepted.
To display the WPA settings in a service profile, use the following command:
show service-profile {name | ?}
To display the WPA settings in effect in service profile wpa, type the following command:
DWS-1008# show service-profile sp1
ssid-name: private
Beacon: yes
DHCP restrict: no
Short retry limit: 5
Auth fallthru: none
Enforce SODA checks: yes
Custom success web-page: Custom failure web-page:
Custom logout web-page:
Static COS: no
CAC mode: none
User idle timeout: 180
Keep initial vlan: no
Web Portal ACL: <none>
WEP Key 1 value: <none>
WEP Key 3 value: <none>
WEP Unicast Index:
ciphers: cipher-tkip, cipher-wep40
authentication: 802.1X
TKIP countermeasures time: 30000ms
11a beacon rate: 6.0
11a mandatory rate: 6.0,12.0,24.0
11b beacon rate: 2.0
11b mandatory rate: 1.0,2.0
11g beacon rate: 2.0
11g mandatory rate: 1.0,2.0,5.5,11.0 standard rates: 6.0,9.0,12.0,18.0,24.0, 36.0,48.0,54.0
The WPA settings appear at the bottom of the output.
Note: The WPA fields appear in the show service-profile output only when WPA is enabled.
D-Link DWS-1008 User Manual

Displaying WPA Settings

ssid-type: crypto
Proxy ARP: no
No broadcast: no
Long retry limit: 5
Sygate On-Demand (SODA): no
SODA remediation ACL:
Custom agent-di rectory:
COS: 0
CAC sessions: 14
Idle client probing: yes
Web Portal Session Timeout: 5
WEP Key 2 value: <none>
WEP Key 4 value: <none>
WEP Multicast Index: NO
multicast rate: AUTO
standard rates: 9.0,18.0,36.0,48.0,54.0
multicast rate: AUTO
standard rates: 5.5,11.0
multicast rate: AUTO
1

Advertisement

Table of Contents
loading

Table of Contents