The following command configures a service profile named corp1, and assigns SSID mycorp_rnd to
it:
DWS-1008# set service-profile corp1 ssid-name mycorp_rnd
success: change accepted.
The following command applies the name corporate users to the SSID managed by service profile
mycorp_srvcprf:
DWS-1008# set service-profile mycorp_srvcprf ssid-name "corporate users"
success: change accepted.
To remove a service profile, use the following command:
clear service-profile name [soda {agent-directory | failure-page | remediation-acl |
success-page | logout-page}]
The soda options reset Sygate On-Demand (SODA) settings to their default values. If you omit the
soda option, the service profile specified by name is completely removed.
To change a setting in a service profile without removing the profile, use the set service-profile
command for the setting you want to change. Do not use the clear service-profile command.
Disabling or Reenabling Encryption for an SSID
To specify whether the SSID is encrypted or unencrypted, use the following command:
set service-profile name ssid-type [clear | crypto]
The default is crypto.
D-Link DWS-1008 User Manual
Removing a Service Profile
Changing a Service Profile Setting
1