Configuring Soda Functionality - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

7. At the completion of his or her session, the user can close the SODA Virtual Desktop or
point to an advertised logout URL. Either of these actions cause a customizable logout
page to be loaded in the browser window. Accessing the logout page causes the user to
be disconnected from the network.

Configuring SODA Functionality

Configuring SODA functionality on a switch consists of the following tasks:
1. Configure Web Portal WebAAA for the service profile. See "Configuring Web Portal
WebAAA for the Service Profile".
2. Using SODA manager, create the SODA agent. See "Creating the SODA Agent with
SODA Manager".
3. Copy the SODA agent to the switch. "Copying the SODA Agent to the Switch".
4. Install the SODA agent files in a directory on the switch. See "Installing the SODA Agent
Files on the Switch".
5. Enable SODA functionality for the service profile. See "Enabling SODA Functionality for
the Service Profile".
6. Specify whether to require clients to pass SODA agent checks to gain access to the
network (optional). See "Disabling Enforcement of SODA Agent Checks".
7. Specify a page for a client to load when the SODA agent checks run successfully (optional).
See "Specifying a SODA Agent Success Page".
8. Specify a page for a client to load when the SODA agent checks fail (optional). See
"Specifying a SODA Agent Failure Page".
9. Specify an ACL to apply to a client when it fails the SODA agent checks (optional) See
"Specifying a Remediation ACL".
10. Specify a page for a client to load when logging out of the network (optional). See
"Specifying a SODA Agent Logout Page".
11. Specify an alternate name for the directory where the SODA agent files for a service
profile are located (optional). See "Specifying an Alternate SODA Agent Directory for a
Service Profile".
12. Remove the SODA agent files from the switch (optional). See "Uninstalling the SODA
Agent Files from the Switch".
D-Link DWS-1008 User Manual 0