Displaying Rf Neighbors - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

To display the RF Auto-Tuning and other individual radio settings on both radios on the Distributed AP
access point configured on connection 1, type the following command:
DWS-1008# show dap config 1
Dap 1: serial-id: 12345678, AP model: dwl-8220ap, bias: high, name: DAP01 fingerprint: b4:
f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3 boot-download-enable: YES
force-image-download: NO
Radio 1: type: 802.11g, mode: disabled, channel: 6
tx pwr: 1, profile: default auto-tune max-power: default
Radio 2: type: 802.11a, mode: disabled, channel: 36
tx pwr: 1, profile: default auto-tune max-power: default
To display the other radios that a specific D-Link radio can hear, use the following commands:
show auto-tune neighbors [ap ap-num [radio {1 | 2| all}]]
show auto-tune neighbors [dap dap-num [radio {1 | 2| all}]]
The list of radios includes beaconed third-party SSIDs, and both beaconed and unbeaconed D-Link
SSIDs.
To display neighbor information for radio 1 on the directly connected access point on port 2, type the
following command:
DWS-1008# show auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel Neighbor BSS/MAC
----------------------------------------------------------
1 00:0b:85:06:e3:60
1 00:0b:0e:00:0a:80
1 00:0b:0e:00:d2:c0
1 00:0b:85:06:dd:00
1 00:0b:0e:00:05:c1
D-Link DWS-1008 User Manual

Displaying RF Neighbors

RSSI
-46
-78
-74
-50
-72
18