Displaying Vlan Information - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

To display configuration information and statistics for Layer 2 forwarding restriction, use the following
command:
show security l2-restrict [vlan vlan-id | all]
The following commands restrict Layer 2 forwarding of client data in VLAN abc_air to the default routers
with MAC address aa:bb:cc:dd:ee:ff and 11:22:33:44:55:66, and display restriction information and
statistics:
DWS-1008# set security l2-restrict vlan abc_air mode enable
permit-mac aa:bb:cc:dd:ee:ff 11:22:33:44:55:66
success: change accepted.
DWS-1008# show security l2-restrict
VLAN Name
---------------------------------------------------------------------------------------------------------------
1 abc_air
The En field indicates whether restriction is enabled. The Drops field indicates how many packets were
addressed directly from one client to another and dropped by MSS. The Hits field indicates how many
packets the permitted default router has received from clients.
To reset the statistics counters, use the following command:
clear security l2-restrict counters [vlan vlan-id | all]
To display VLAN configuration information, use the following command:
show vlan config [vlan-id]
To display information for VLAN burgundy, type the following command:
DWS-1008# show vlan config burgundy
VLAN Name
--------------------------------------------------------------------------------------------------------------------------
2 burgundy
Note: The display can include access ports and wired authentication ports, because MSS dynamically
adds these ports to a VLAN when handling user traffic for the VLAN.
D-Link DWS-1008 User Manual
En Drops
Y 0

Displaying VLAN Information

Admin VLAN Tunl
Status State Affin Port
Up Up
Permit MAC
aa:bb:cc:dd:ee:ff
11:22:33:44:55:66
Tag
5 none
2 none
3 none
4 none
6 none
Hits
5947
9
Port
State
Up
Up
Up
Up
Up