Policy Binding - Dell PowerConnect 5524P User Manual

Policy Binding

After policies are created, they must be bound to interfaces (ports or
LAGs).When a policy is bound to a specific interface, it becomes active on it
(subject to time range restrictions). Only one policy can be active on a single
interface, but a single policy can be bound to more than one interface.
When a policy is bound to an interface, it filters and applies QoS to ingress
traffic that belongs to the flows defined in the policy. The policy does not
apply to traffic egress to the same port.
To edit a policy, it must first be removed (unbound) from all those ports to
which it is bound.
To define policy binding:
1 Click Quality of Service > QoS Advanced Mode > Policy Binding to
display the Policy Binding: Summary page.
Figure 22-16. Policy Binding: Summary
686
Dell PowerConnect 55xx Systems User Guide