Dell PowerConnect 5524P User Manual page 542

User Priority — Select the traffic priority assigned to the network
–
application.
– DSCP Value — Select the value to be used by neighbors to mark the
traffic sent to the switch.
Configuring MED Network Policies Using CLI Commands
The following commands are used to configure MED network policies.
Table 17-3. LLDP MED Network Policies CLI Commands
CLI Command
lldp med network-policy number
application
{ |
tagged untagged
][
priority dscp value
no lldp med network-policy number
The following is an example of the CLI commands:
console(config)# lldp med network-policy 1 voice-signaling
vlan 1
542
Dell PowerConnect 55xx Systems User Guide
[ ] [
vlan id vlan-type
}] [
up
]
Description
Defines an LLDP MED network
policy.
Use the no form of this command
to remove an LLDP MED
network policy.